Only 0 left in stock.

Cable extension transducer 4..20mA, 40" stroke, 9-35 VDC, thermoplastic body, 0.5% accuracy, 0.02% repeatability, 2 metre cable

Cable extension transducer 4..20mA, 40" stroke, 9-35 VDC, thermoplastic body, 0.5% accuracy, 0.02% repeatability, 2 metre cable

JX-P420-40-N11-20S-N12
  • Only 0 left in stock.

    $1,120.00


JX SERIES

UniMeasure JX Series transducers are low-cost devices for use in light to moderate duty applications in wet or dry environments. The plastic bodied device is ideal for high-volume OEM situations where cost is a major consideration and in applications where small size or low weight are of paramount importance. Models are available in 13 measurement ranges with the shortest range of 2″ (50 mm) and the longest range of 80″ (2000 mm).

Loop powered 4 to 20 mA current transmitter with adjustable zero and span controls. Input voltage is 9 to 35 VDC depending upon total loop impedance.

The JX-P420 series linear position measuring transducer is a low cost device for use in moderate duty applications in hostile wet or dry environments. The chemical resistant thermoplastic case of the transducer provides IP-65 (NEMA 4X) ingress protection for applications where exposure to washdown, rain, oil and other liquids may occur. The sealed case is achieved through the use of o-rings and a low friction shaft seal. An integral dust wiper insures that the wire rope stays clear of debris as it is extracted and retracted. The standard electrical connection includes a sealed bulkhead fitting and multi-conductor electrical cable. An optional connector and mating connector are also available. As a convenience, optional connector locations on the transducer body are offered. The wire rope exit direction may be specified at time of order or may be user adjusted at time of installation.

The JX-P420 series transducer is a loop powered device with a 4 to 20 mA current output that requires a
two wire connection. The transducer, power supply, and current monitor are connected in series. Zero and span
adjustment potentiometers are accessible by removing two sealing screws in the rear of the transducer housing. Zero and span allow for adjustment for a full 4 to 20 mA output at between 50% and 100% of maximum linear travel.

Featuring:

 

  • Low Cost
  • IP-65 (NEMA 4) Capable
  • Thermoplastic Housing
  • Analog or Digital Output
  • Connector/Cable Connection
  • Integral Dust Wiper 
  • Compact Size
  • 80” (2000 mm) Max. Range
  • 13 Measurement Ranges
This product is available.