Sprint Electric 3200i - 48A Single Quadrant Isolated DC Thyristor Drive for motor speed and torque control.
415V AC supply - 11kW(14.6HP) at 320V DC.
240V AC supply - 7.0kW (10.0HP) at 180VDC.
(Low voltage variants are available see links below)
Size: 200mm Wide x 110mm Deep x 150mm High. IP00
001 - includes optional isolated auxiliary terminals 51 to 68.
Max & Min Speed
Adjustable IR compensation for improved AVF speed regulation
Switch selectable Tacho or Armature voltage feedback
Selectable dual voltage ac supply
+/- 24V and 12V supllies 24ma and 10ma rated respectively
Aux speed trim input +ve and –ve
Aux setpoint,speed and ramp analogue outputs
Aux stop/start for stall condition
Zero speed or Stall relay volt free changeover contact
Auxiliary stall and zero speed external relay drivers
Run inhibit Note Field and power terminals remain live . (RUN must not be relied on during hazardous operations)
Input Current: 48A to 72A (depending on motor inductance).
Input Voltage: 240V or 415V single phase +-10% at 50/60Hz.
Field Rating: 2A @ 90% input voltage (For half wave field volts 45% input voltage, connect field to F- and N)
Armature Form Factor: Typical form factor 1.5 (load dependant).
Stall protection @ 150% included
Wall mount in clean environment or cubicle mount.
Rated at -10° to 40°C Ambient.
Heat Loss at Max output: 150W.
Mounting via 2 x M5 by 50mm @ 140mm