Invertek Optidrive E2 AC Inverter for 1.5kW (2HP) or 1.1kW (1.5HP) 240V 3 Ph motor in VxF control to 7A. Simple to set up and converts single phase 240V input to 3 phase 240V for a standard AC Induction motor.

Frame 2 Size - 109mm Wide x 150mm Deep x 221mm High, IP20

Overload - 150% Output Current (10.5A) x 60 seconds, 175% x 2 seconds
Speed Control Range - 0/500Hz.
Braking - To 50 Ohm minimum external resisitor (not supplied).

Features - 2 Analogue/Digital Inputs, 2 x Digital Inputs (4 total), 1 x Analogue/Digital Output, 1 Relay Contact set.
Parameter setting via integral keypad, remote keypad (optional) or from a PC via 'OptiStore' software (RS485 to USB cable required - see linked products below)
Parameter setting from compatible Windows based PDA or Smartphone cable-free via 'OptiWand' software

EMC Filters to EN61800-3 category C2 for 1st environments (domestic) for screened cable lengths of up to 5m (add Optifilter for lengths above 5m).
EMC Filters to EN61800-3 cat C3 (2nd environment - Industrial) for screened cable lengths of up to 25m.

Input Current - 19.3A
Input Voltage - 200~240V ± 10%

Wall mount in clean environment or cubicle mount.
Rated at 50°C Ambient.
Ventilation space above and below - 50mm.
Ventilation space at sides - 50mm.
Mounting onto symmetrical DIN rail or use the screw fixings for mounting at rear.