Remote Keypad and Display

Optiport Plus and Optiport E2 are intelligent devices with a built in microcontroller. Optidrive Plus connects to either a single Optidrive Plus 3GV / VTC or a network of Optidrives using an electrical interface. Optidrive E2 connects to Optidrive E2 units, either singularly or in a network.

Optiport units act as the remote keypad and display for the Optidrive on the network which has the same serial address. The physical layout and the operation of the Optiport keypad and display mimic the Optidrive exactly.

Key Benefits

• Real time keypad and display operation mimcs Optidrive
• Single electrical interface for power and data
• Communicates with any compatible drive across a network
• Automatic connection to compatible drives
• IP54 rated when through panel mounted
• Bright LED Display
• Membrane keypad
• Parameter lock function available
• 3m Data Cable included

General Specification

• Signal Interface: Standard 6 way RJ11 or 8 way RJ45
• Supply Input: 10 – 36VDC, 30mA
• RS485 signal : industry standard 2 wire + 5V differential
• Operating Temperature : 0 – 50°C
• Storage Temperature : -40 – 60°C
• Relative Humidity : <95% (non condensing)
• Protection Rating : IP54

Compatability

Optiport Plus, OD-OPRTP for Optidrive Plus and Optidrive VTC
Optiport E2, OPT-OPORT for Optidrive E2

Optiport Plus and E Configurations

One Optiport Plus with one drive

One Optiport Plus with multiple drives

Optiport Plus Only Configurations

Two Optiport Plus units with one drive

Two Optiport Plus units with multiple drives